Search results for query: *

Went to fire up the cuda this morning and nothing.. usually blasts right off. Checked for fuel squirting, had fuel. Hooked up timing light and cranked. No flashing light. Put on a mopar orange box and car fired up. Anyways when I rewired the car I made no provision for a ballast. MSD time or ??

I'd like to put a tach in my car. What kind of tach do you guys like. I'd like a column mount tach. I am running electronic ignition (FBO). Just looking for a few suggestions. Thanks Luke

Let me start off by saying that I am by no means a lame person that cant wrench and by no means an electrical guru and yes I have read several threads using the search function to try and help fix my problem. 69 barracuda I re wired it with a ron francis kit. When I re wired my car I did it...

I got some relays out of a mid 90's Chrysler. Where can I find out what they are rated for. The number on top of them is 83159 and some are marked 50732.

I'm rewiring my car with an aftermarket "kit". Anyways I have the car running now with their ignition wiring. I had to fab a jumper wire from ign 1 to ign 2 on the back of the switch because their kit only has a 4 wire connection at the switch. I am working on the brake warn light now off of the...

I mocked up the wiring for my switch and fired it up on the workbench with the motor. it works fine but I cant find where the washer motor gets power from. my shop manual is at work and my other schematics do not show it at all. Help appreciated. Also there is a terminal on the back of the...

I am in the process of rewiring my car. Is there a way to function test the headlight switch by hooking up the test leads to the switch, running the switch through the motions and make sure the the wiring is in the right spot ? Any insight appreciated..

Hello all. I am rewiring my car an now at the point where I need to do the gauge cluster. I am looking for the terminals that crimp on the ends of the gauge wiring that insert into the circular plug. I know they are an open barrel and have been googling but I must not be guessing the name of...

I just got done taking out all of my old wiring. Anyways I have a couple of questions They are closed today otherwise I would call them. First question is their instructions say to hook up the fuse panel power, And alt charge wire to the positive post on starter soleniod not the relay. It...

What tool do I need and where do I get it from to correctly crimp the shown terminals. Thanks Luke

i'm getting ready to rewire my car. I have a flamethrower coil that states to bypass or jump the ballast. So If I am correct instead of using a jumper I should just be able connect the wires on either side of the ballast to themselves ? Would eliminate extra stuff not needed. Let me know if...

My ignition switch is feeling like it is worn out. Doesn't turn freely anymore, have to put the key in just the right way etc. I guess I'd be wore out too if I had someone sticking something in me and turning it for 40 plus years. LOL I have the whole dash out now and would like to fix this...

O.K fellas, before I totally demolish mine, Whats the trick to get these things to work. Mine do not work. Here is what I have done so far, removed them from hood, hooked the wire to 12 volt power and grounded the housing, nothing. I am guessing that the bulbs are shot. There is a knurled sleeve...

My new to me 69 barracuda has charging gremlins. I have been reading a ton on here about diagnosing it. Especially 73ABodEE's post from awhile back. Today I plan on doing the splice and reroute and ammeter delete like on madelectrics site. I looked at my firewall connectors last night and they...