Search results for query: *

I just finished installing a water temp gauge and transmission temperature gauge. Both are working but the transmission temperature didn’t move until about a mile into the drive and then it stayed around 115. I realized I did wire them differently though and wanted to see if that had an effect...

I haven’t driven my car in six years. It’s getting close so today I decided to see if the audio still worked. Head unit fired up and I could hear beeping as I went through the menu. Plugged in the USB and tried to play a song and I heard a pop from the speakers then the head unit restarted. Same...

Where can I buy a solid state IVR? I am not electrically inclined at all so I don’t really know if I could make my own.

Typically when I install a new starter I am taking the old one off and putting the new one in its place so I know what wires go where. I am starting from scratch so what wire goes in which terminal. I am using a starter off a truck so the terminals are stacked instead of side by side. Thank you.

I seem to have misplaced my battery hold down for my 73 swinger. What kind of aftermarket pieces are people using?

I took my dart out for a cruise tonight and enjoyed myself then I got home and saw the bad news. Coolant was dripping from the overflow tube and some had come out the cap. My temp gauge never went above half way so I recon I have a bad sensor or wire. The sensor is less than two years old but...

Went to order a chrome ignition box and noticed they only have four prongs while my Oem piece has 5. What's going on there?

We took the 6al box and coil off my dad's car and are in the process of putting everything on mine. We have orange to posotive on the coil and black to negative. The red wire goes to the brown ignition hot wire. We can't figure out which wire is the ignition neutral that goes to the white...

My dad took his msd 6al box and blaster coil and distributor off his mustang. Right now it's sitting on the bench in our garage and was curious if it would be worth swapping out my mopar electronic ignition and mp distributor for. Last year I was having issues with my car cutting out at the...

I got my motor in the car and ready to fire up. I made sure to make the distributor point toward the number one cylinder. I have a timing light and was curious is the next step is just to turn the key and start timing while it's running or do I do something else Before firing it up. Also...

I got a lock down collar for my small block and went to install it last night but the picture in the instructions shows it on the oil pump gear. I was under the impression that this collar goes on the distributor shaft. Am I wrong?

I working on a Christmas list and was looking at the MSD distributor. Is this a good product for my 360 or do mopar guy usually go with another brand?