Search results for query: *

Does anyone make a bolt on 6 pack scoop?

Has anybody here bought an AAR Quality Fiberglass hood in the last year? I was going to order one for my Bee but heard the quality has went down hill. Also I am 2 hours away from Glasstek so anybody have a Glasstek hood? I need feedback on these companies or others. Going to order a street...

Going to paint my engine compartment and later on the whole car. Anyone ever use Summit Racing brand paint to paint a car? It is cheap and I am on a shoe string budget.

Who sell good quality Demon snorkel or twin scoops. AAR fiberglass any good?

I removed the emblem on my 71 Dart trunk lid. It is a push pin type of emblem. Had little plastic pieces on the pins to hold it tight in the holes. When I popped off the emblem one plastic piece broke and the other went on the garage floor somewhere. Is there any tricks to get this back on tight?

This is about a year away. But I was thinking about putting a Demon scoop on my 71 Dart. To me the twin scoops have always looked to close together on a Dart or Demon.My buddy said I should add a wing also.But I am not sure I like go wings on a Dart.So if you have a Dart or even a Scamp with a...

Has anybody here used their paint. Thinking about ordering some. They have ready to spray in a quart or by the gallon.They offer all the factory Mopar colors. I can't afford high end paint... Thanks Jim

I have not been able to find 70-72 Dart front lower quarter patch panels. The area between the rear of door and in front of the back tire. Does anyone repo this? Or do you have to buy a whole side skin?

On my 68 Barracuda fastback I have a gap where the two side windows meet.The gap is under the felt where te two side window meet.The felt is in nice contion.Is there a way to adjust either window to fix this issue?

I have a 68 Barracuda and the drivers side rear side glass goes up and down kind of hard.And the passenger side will only go up and down a few inches.What is the best cure to fix this issue?Is there somewhere on the track or window mech. that needs greased? Thanks,Jim

Buffing the 68 Barracuda I just got.It was totally fadded.I got the whole car buffed out and now it looks way better than it did a week ago.Even has tons of scratches and dings in the body but looks better.I can not get the hood to buff out.I buffed a corner of it and just get a slight shine.Any...

I can not afford a perfect Duster grille for my 71.But I bought a decent one that I can restore some and make it look a whole lot better.It has a few of the fins that were repaired poorly.I have two parts grilles I can cut the fins out of and do a better repair.How can I cut the fins out of the...

This picture has me thinking I need to find a junk 70 Road Runner hood.

I am thinking about pulling the passenger fender off my Duster and repainting it.Looks like it has been repainted years ago and it is not the best job. My question is can I paint it with single stage and then a few days later wet sand and buff it? The last time I did this it was dark metallic...

It it OK to wax my car before I apply side stripe decals? Or does it matter? Thanks,Jim

I need a 71 Duster grill.I found one local for $40.00 for a 1970 Duster.Are they the same? Look the same to me. Thanks,Jim

I am buffing my Duster.If I want to touch up a few spots on the paint can I scuff and paint.Or should I use wax remover first? I am using buffing compound right now and not wax. Thanks,Jim

I know AMD is the best metal out there right now.I read a thread on here were the AMD Duster 1/4's have some fitment issues.Has anyone hung a 67-69 Barracuda 1/4 yet? Any issues? Thanks,Jim

Does anyone make 1967-1969 Valiant rear quarter patch panels? Is behind the rear wheel the same as a 67-69 Dodge? What about patches for the wheel arch? Thanks,Jim

I am think of converrting my 67 Barracuda gas tank to the 68 style.I have the 68 style rear mounting bracket that came with my new trunk pan.What do I need to do where the tank straps mount up front?I am thinking I will have to cut two slots.Is there a place to cut the slots on a 67 body.I am...

I am going to change out some wiper seals out for a friend.Should I use a sealer?Or just put them on dry? Thanks,Jim

Ok I bought a pretty clean trunk lid for my 67 Barracuda fastback last year from a member here.He told me it was a 67 lid but when I picked it up at the Nats he said it may be a 68 lid.I know the lids are probably the same other than maybe the holes for the trim and panel.But the trim and panel...

I am stripping my roof getting it ready for primer.I looks like the rain gutter was filled with seam seal at the factory.What have you guys who have done a resto. in the past done with this area.Dig out all the seam sealer and fill it back in with filler?Mine has a few hairline cracks in it and...

I am getting ready to prime the bottom side of my roof.This would be the area under the headliner.I have a HVLP spray gun but I am thinking the old type of spray gun with the paint cup on the bottom may work out better.Looks like I am going to have to hold the spray gun at a pretty go angle...

This is on Ebay sorry I do not know how to post the link.NOS Mexican 225 emblem.It looks like a Formula S emblem...Maybe I should buy them and put them on my Formula fenders...LOL Jim

Ok in the next few months I should be painting a few places on my Formula S.Like the bottom side of the roof,top side of the floor and trunk pan,and the back side of the firewall.And by the end of fall I hope to have the door jambs and engine compartment painted.By the way as of now the color...

I am mini tubbing my 67 Barracuda.I have the tub on the drivers side done,but I need to weld the seat hinge bracket back on.To put the bracket where it needs to be it looks like it wil be forward 3/4-1 inch from it original location.How do you guys fix this? My thoughts....1.. Modify the...

I need front windshield chrome for my 67 Barracuda.Is 67-76 Dart chrome the same? Thanks,Jim

I have been tring to get my Uncle to help me for the last month.He promised to help on the 67 Formula.He has painted cars for over 30 years and I would rather him do my primering and painting.But at this point I have gave up on him and I am going to do it myself. I bought self etching...

What are you guys using for trunk extensions on a 67-69 Barracuda?I bought AMD Duster extensions but they are WAY WAY off.They are too wide and too long. Jim