Pam's Jamaican Blue Baby

-
OK..got some more .030 and back to the under side...got them all welded up on the back side and was finishing a few details on top when i ran out of gas.....not personally....just the welder.

So it's supposed to blizzard tonight (yea right feels like 38 deg outside and wind from the south) anyway if it misses us i get anew tank tomorrow and then finish up.

Friday is the tearing into the front end and the more I look at it the more i wish it would go away...

Mop
 
How do you like these?

Well I got the floor pans ground down scuffed up and painted today...yeah!

Looking pretty clean now so I will move on to the engine bay. I still have to do the underside but I will get to that in a bit....I still need to weld in the frame rail connectors.

Keepin on

Mop
 

Attachments

  • 100_3768.jpg
    61.5 KB · Views: 802
momoparman said:
How do you like these?

Well I got the floor pans ground down scuffed up and painted today...yeah!

Looking pretty clean now so I will move on to the engine bay. I still have to do the underside but I will get to that in a bit....I still need to weld in the frame rail connectors.

Keepin on

Mop
Click to expand...

:thumbup:
 
Confusedcuda once said..if the hand is open does it not need a beer?

Miller light tall boy for two then.....say's grasshopper.:iconbigg:

Friday nights demofest...

So here comes the dilemma....how far do you go? Lots of inner fenderwell issues but I have 2 perfect wells from a demon (Sorry Demon...we will miss you and cherish your sweet cherry inside parts)....Amen

I feel like I need to cut more out....nurse...an input?

Mop
 

Attachments

  • 100_3771.jpg
    87.5 KB · Views: 765
  • 100_3773.jpg
    112.1 KB · Views: 783
  • 100_3781.jpg
    100.6 KB · Views: 760
FYI....I am replacing both inner wells....the question is beyond that.

But how much more is the ?

:?
 

Attachments

  • 100_3771.jpg
    87.5 KB · Views: 789
More hacking and grinding.....got one mocked up and looks pretty good.

I'm gonna take the upper a-arm/shock tower braces off the Demon clip and use them on this mess....oh my.:scratch:

Mop
 

Attachments

  • 100_3789w.jpg
    65.9 KB · Views: 735
  • 100_3788w.jpg
    67.2 KB · Views: 732
  • 100_3787w.jpg
    55.6 KB · Views: 755
  • 100_3786w.jpg
    65 KB · Views: 774
  • 100_3782w.jpg
    67.8 KB · Views: 747
Finally got the garage cleaned up and the car turned around....beautiful weather this weekend. Finally!

So I spent time grinding out all the crap and getting to the working metal.

I have a few small areas to clean up but I think I'm ready to sand blast the rest. I salvaged all the parts I'm going to need from the Demon clip. Lots of spotweld drilling but I got it all apart.

I started scraping all the old undercoating off so I can sandblast the paint.

Busy work week so I am going to be slower as I get further into it.

Looking like 2012 for unveiling.

We'll see.

Mop
 

Attachments

  • 100_3796_00w.jpg
    58 KB · Views: 863
  • 100_3799_00w.jpg
    73.1 KB · Views: 859
  • 100_3800_00w.jpg
    66.9 KB · Views: 886
  • 100_3801_00w.jpg
    61.6 KB · Views: 855
  • 100_3807_00w.jpg
    60.1 KB · Views: 861
  • 100_3811_00w.jpg
    69.2 KB · Views: 842
Well I picked up the engine today...looks sweet. I couldn't help but set the intake in place to see what it's gonna look like.

Looks pretty sweet to me. So now I gotta get going on the rust work again but in the mean time....I got a new sculpture for my office.

Enjoy,

Mop
 

Attachments

  • 100_3868w.jpg
    59.9 KB · Views: 850
  • 100_3866ws.jpg
    65.6 KB · Views: 830
  • 100_3865w.jpg
    59.8 KB · Views: 815
Thanks...and yea she's real lucky :-D

If she was any luckier she'd have already replaced me with a working model.

Naw...she'd pretty stoked. I showed her the motor tonight and she thought it looked real cool...:toothy10:

So more work to do and more pics to come.....later.

Mop
 
Looking real good. Some of those inner fender/frame rail pictures almost had me thinking flashback. Keep it up.
 
More tear down happened this Friday.

got the K frame out and the frame wheeler in place.

Did a bunch of sandblasting over the last few days and have about half the stuff done....couple more days then off to powder coater.

Got the trans back today but the builder did not clean the case very well...:-?

So I will clean it myself along with more parts. It's almost warm enough to get back outside and grind out the last of the metal and get the welding back on.

Enjoy

Mop
 

Attachments

  • 100_3882w.jpg
    65.6 KB · Views: 765
  • 100_3884w.jpg
    64.3 KB · Views: 760
  • 100_3886w.jpg
    52.7 KB · Views: 771
  • 100_3888w.jpg
    54.3 KB · Views: 769
  • 100_3890w.jpg
    58.5 KB · Views: 775
Been busy with spring cleaning and trying to keep my business floating so I am off the hard stuff and onto the hard stuff....Details, details.

Here is the restored heater box and windshield wiper motor/gear box restored. Took th etime to clean the comutator, brushes and re-grease the bushings.

Yes I painted the heater box....it looked like crap/scratched up so I did a low sheen black. It will look great under the dash.:grin:

Used the Detroit Muscle heater box kit...worked sweet. Had no idea there was so much foam in these things. I have replaced heater cores in old Mopars before but none had foam left in them....so that's why they all leaked hot air!:tongue10:

More detail work to come....is all about the details.

Mop
 

Attachments

  • 100_4003w.jpg
    65.1 KB · Views: 739
  • 100_4002w.jpg
    64.2 KB · Views: 742
  • 100_4001w.jpg
    61.2 KB · Views: 743
  • 100_4000w.jpg
    65.8 KB · Views: 743
  • 100_3999w.jpg
    76.9 KB · Views: 763
  • 100_3996w.jpg
    68.1 KB · Views: 757
  • 100_3993w.jpg
    64.1 KB · Views: 759
Few more.

I have been working on the grills....disassembled and started restoring them my self as far as I can. Sandblasted all the framework and the park light housings and re-painted/cleared them. Polished the factory parking light bezel..looks pretty good somehow these survived where all teh other chrome did not.

Sent the big chrome grill bezels off to a plater/fixer...they had issues.

Gonna treat with the egg-crate locally. I know the finish should be anodized but for sake of $$$ I can have my friend Mike CR plate them with his new AL system...it will be brighter than OEM but that's OK.

Jackson Plating in KCMO.....plug.

So here is that work so far....one little thing every day.


Enjoy.

Mop
 

Attachments

  • 100_4008w.jpg
    58.5 KB · Views: 776
  • 100_4009w.jpg
    59.8 KB · Views: 738
  • 100_4012w.jpg
    57 KB · Views: 765
  • 100_4014w.jpg
    69.2 KB · Views: 762
momoparman said:
Few more.

I have been working on the grills....disassembled and started restoring them my self as far as I can. Sandblasted all the framework and the park light housings and re-painted/cleared them. Polished the factory parking light bezel..looks pretty good somehow these survived where all teh other chrome did not.

Sent the big chrome grill bezels off to a plater/fixer...they had issues.

Gonna treat with the egg-crate locally. I know the finish should be anodized but for sake of $$$ I can have my friend Mike CR plate them with his new AL system...it will be brighter than OEM but that's OK.

Jackson Plating in KCMO.....plug.

So here is that work so far....one little thing every day.


Enjoy.

Mop
Click to expand...

Looking great Mop................... love the attention to the details... :thumblef:
 
I would like to be able to "send" my front bezels off somewhere. I removed the anodized and buff them out myself. I will never do that again!!

Top notch work mop... as always.
 
You must log in or register to reply here.
-

Back
Top