Post your sound bytes here.

-
OK.......first YouTube, shaky and short. Dart Idling around 900.

408 SB, 1 7/8 TTI primaries, 3" TTI duals thru X, thru Dynomax's, out past bumper. Cam is Hughes....Intake 252 @ .050 .610, E 256 .614 on 103 CL and 106 LSA. Static Comp. is about 10.65.

[ame="http://www.youtube.com/watch?v=nOxwp_U9BX4&feature=youtube_gdata"]http://www.youtube.com/watch?v=nOxwp_U9BX4&feature=youtube_gdata[/ame]
 
OK.......first YouTube, shaky and short. Dart Idling around 900.

408 SB, 1 7/8 TTI primaries, 3" TTI duals thru X, thru Dynomax's, out past bumper. Cam is Hughes....Intake 252 @ .050 .610, E 256 .614 on 103 CL and 106 LSA. Static Comp. is about 10.65.

Wow, you car sounds awesome!! What is that gas cap you have on there? Is that billet or just a block off?
 
Thanks jr,

It is just a piece of aluminum I machined to block off the original filler, as I have a cell in the trunk. Somewhere on this forum I posted a drawing of it with dimensions.

Your blue Dart is pretty sweet looking!
 
Thanks. I do remember seeing that post about the block off plate now, I just didn't put it together that it was yours.
 
340 .040 over
10.2:1 compression
472 lift
228@.050 duration
Dougs D460 block hugger headers
to temporary 6 feet of 2-1/2 inch flex pipe
No mufflers at all (Yet)



[ame="http://i2.photobucket.com/albums/y36/bbrroowwnn/1929%20dodge%20coupe%20video/000021.mp4"]
th_000021.jpg
[/ame]
 
ok first post is some race Hemi!

605 Indy motor thru custom headers and super 40 mufflers
[ame="http://www.youtube.com/watch?v=nIEpOT2oRys&list=UU2UfycLWJQRo0DnRrnW3KxQ&index=3"]SS And AFX Green SS Hemi Dart Walk Around - YouTube[/ame]

Sox And Martin Built 426 open headers
[ame="http://www.youtube.com/watch?v=GHrQdBkSJo8&list=UU2UfycLWJQRo0DnRrnW3KxQ&index=1"]SS And AFX Sox And Martin BO29 Hemi Cuda - YouTube[/ame]

528 Race Hemi, Open Headers
[ame="http://www.youtube.com/watch?v=ZNSpC2Nu-gE&list=UU2UfycLWJQRo0DnRrnW3KxQ&index=10"]SS And AFX Landy In The 9's.MOV - YouTube[/ame]

472 race Hemi
[ame="http://www.youtube.com/watch?v=m4DMFWiFU7I&list=UU2UfycLWJQRo0DnRrnW3KxQ"]SS And AFX Mr. Norms SS Hemi Dart #2 - YouTube[/ame]
 
Now Some Slant Bytes!

Built Slant 6 Open Headers
[ame="http://www.youtube.com/watch?v=iouvjSfeans&list=UU2UfycLWJQRo0DnRrnW3KxQ"]Run3.MOV - YouTube[/ame]

Burnout Box
[ame="http://www.youtube.com/watch?v=cTr5qVwpUzA&list=UU2UfycLWJQRo0DnRrnW3KxQ"]Burnout 9/11 - YouTube[/ame]

Super 44 on 9.25 compression (same motor but before head and block shave)
[ame="http://www.youtube.com/watch?v=2ABKFcGty38&list=UU2UfycLWJQRo0DnRrnW3KxQ&index=43"]Walk Around Day.MOV - YouTube[/ame]

Dual 2.25 thru Dynomax True flow x pipe muffler
[ame="http://www.youtube.com/watch?v=pviXVh2Uaq0&list=UU2UfycLWJQRo0DnRrnW3KxQ"]68 dodge Dart - YouTube[/ame]
 
Posting this for my good friend 340 8BBL. I shot these videos about a week ago. For some reason I can't get the actual clips to load up, so the links will have to do for now.

Motor: 71 340 about 10:1,eddy street tunnel ram with custom top and 390 holleys.
Cam: Crane HMV 278/290 114 lsa.
Exhaust: Hooker headers dual 3" with x pipe to 2.5 tail pipes with race bullet mufflers and stainless resonated tips.

[ame="http://s13.photobucket.com/user/dravey/media/Duster%20picture%20links/MVI_4210_zps5005dcad.mp4.html"]MVI_4210_zps5005dcad.mp4 Video by dravey | Photobucket[/ame]

[ame="http://s13.photobucket.com/user/dravey/media/Duster%20picture%20links/MVI_4212_zps1a379c4a.mp4.html"]MVI_4212_zps1a379c4a.mp4 Video by dravey | Photobucket[/ame]

[ame="http://s13.photobucket.com/user/dravey/media/Duster%20picture%20links/MVI_4213_zps80a8996a.mp4.html"]MVI_4213_zps80a8996a.mp4 Video by dravey | Photobucket[/ame]
 
Posting this for my good friend 340 8BBL. I shot these videos about a week ago. For some reason I can't get the actual clips to load up, so the links will have to do for now.

Motor: 71 340 about 10:1,eddy street tunnel ram with custom top and 390 holleys.
Cam: Crane HMV 278/290 114 lsa.
Exhaust: Hooker headers dual 3" with x pipe to 2.5 tail pipes with race bullet mufflers and stainless resonated tips.

http://s13.photobucket.com/user/dravey/media/Duster picture links/MVI_4210_zps5005dcad.mp4.html

http://s13.photobucket.com/user/dravey/media/Duster picture links/MVI_4212_zps1a379c4a.mp4.html

http://s13.photobucket.com/user/dravey/media/Duster picture links/MVI_4213_zps80a8996a.mp4.html
thanks for posting that up dude.in the video you dont get a real idea of actually how loud it was with that setup.i think i was bleeding out of my ears after the 40+ mile drive home.ive since replaced the race bullets with a set of vintage terminators courtesy of voetom.i also pulled the resonator core out of those stainless tips i built.
 
Man, I can hear the X-pipe really sweeten that thing and make it sing! Thanks for posting that for us Rocker's duster!
Tom Hand
 
Wade that sounds great. I love the tunnel ram.
 
Here's my new 360. Stock 340 cam, Jegs headers, Summit 2.5in duals with H pipe.
[ame="http://www.flickr.com/photos/96481859@N05/8848024433/"]002 | Flickr - Photo Sharing![/ame]
 
Improved clip of the Duster...

9.2'ish to 1 360 otherwise stock with Hughes "Whiplash" cam, Air Gap and 625 Street Demon. Doug's Headers going to 2.5" dual exhaust with Original 40 Series Flowmasters. No X or H for now.

[ame=http://i938.photobucket.com/albums/ad223/kraegel/IMG_0548_zps78f3bdcb.mp4]
th_IMG_0548_zps78f3bdcb.jpg
[/ame]
 
Hi, this video show the sound of my 360ci stock cam, four barrel holley 750 DP, headers and 3" muflers whitout H or X.

[ame="http://www.youtube.com/watch?v=KNsPmLS8ZCE"]dodge gtx v8 360 sonido escapes - YouTube[/ame]
 
71 built 360 with side exhausts Hedman Hedders in a 64 Valiant.

[ame]http://m.youtube.com/watch?v=u2g30I5PfgE[/ame]
 
440 w/ edelbrock heads, MP .557 cam, 2" Pro-parts headers, 3" TTI exhaust with Dynomax super turbos.
[ame=http://i31.photobucket.com/albums/c363/RCK850/VIDEO0013_zps379a32d8.mp4]
th_VIDEO0013_zps379a32d8.jpg
[/ame]
 
340. Delta race 10 flows. X pipe. Dumped at Axle

[ame="http://www.youtube.com/watch?v=i2z4epBFRxc&feature=youtube_gdata_player"]340 idle flowmaster mother thumper cam - YouTube[/ame]
 
[ame="http://www.youtube.com/watch?v=fuWaBbgkJyQ&feature=youtube_gdata_player"]71 340 duster. Flowmaster 10 - YouTube[/ame]
 
I can tell you from the sound, she's hittin on all eight. Good.
 
-
Back
Top