Stop in for a cup of coffee

-
Morning kids! The toolman checkin' in. 10-4 there good buddy. I gotta' fart, you gotta' copy? lol
 
10-1 Receiving Poorly
10-2 Receiving Well
10-3 Stop Transmitting
10-4 Ok, Message Received
10-5 Relay Message
10-6 Busy, Stand By
10-7 Out of Service, Leaving Air
10-8 In Service, subject to call
10-9 Repeat Message
10-10 Transmission Completed, Standing By
10-11 Talking too Rapidly
10-12 Visitors Present
10-13 Advise weather and road conditions
10-16 Make Pickup at…...
10-17 Urgent Business
10-18 Anything for us?
10-19 Nothing for you, return to base
10-20 My Location is ......... or What's your Location?
10-21 Call by Telephone
10-22 Report in Person too ......
10-23 Stand by
10-24 Completed last assignment
10-25 Can you Contact .......
10-26 Disregard Last Information/Cancel Last Message
10-27 I am moving to Channel ......
10-28 Identify your station
10-29 Time is up for contact
10-30 Does not conform to FCC Rules
10-32 I will give you a radio check
10-33 Emergency Traffic at this station
10-34 Trouble at this station, help is needed
10-35 Confidential Information
10-36 Need correct time
10-37 Wrecker needed at …...
10-38 Ambulance needed at .........
10-39 Your message delivered
10-41 Please tune to channel ........
10-42 Traffic Accident at ..........
10-43 Traffic tied up at .........
10-44 I have a message for you
10-45 All units within range please report
10-50 Break Channel
10-60 What is next message number?
10-62 Unable to copy, use phone
10-65 Awaiting your next message or assignment
10-67 All units comply
10-70 Fire at .......
10-71 proceed with transmission in sequence
10-73 Speed Trap at ............
10-75 You are causing interference
10-77 Negative Contact
10-84 My telephone number is .........
10-85 My address is ...........
10-91 Talk closer to the Mike
10-92 Your transmitter is out of adjustment
10-93 Check my frequency on this channel
10-94 Please give me a long count
10-95 Transmit dead carrier for 5 seconds
10-99 Mission completed, all units secure
10-100 Need to go to Bathroom
10-200 Police needed at ..........
 
I like 10-91. The older I get the more that needs to happen. LOL
 
A bunch of us from the neighborhood won a week long stay at a resort in Colorado. We convoy'd out in 3 mini vans and had a blast talking to each other on walkie talkies during the trip.
I was the Toolman, my wife was the Beancounter. Phil was the Undertaker, and his wife Pam was the Stitcher. Kelly was the Pusher.(he was a sales rep for a drug company) but I can't remember what his wife's handle was. 10-4
 
toolmanmike said:
A bunch of us from the neighborhood won a week long stay at a resort in Colorado. We convoy'd out in 3 mini vans and had a blast talking to each other on walkie talkies during the trip.
I was the Toolman, my wife was the Beancounter. Phil was the Undertaker, and his wife Pam was the Stitcher. Kelly was the Pusher.(he was a sales rep for a drug company) but I can't remember what his wife's handle was. 10-4
Click to expand...

That's funny. I have one in the pop and can hear the truckers on I81, Sounds like it definitely defeats the new laser guns for speed. Some funny stuff that goes on with them. Better than the radio when I work on the car.
 
Morning everyone!

Question on fixing framerails, do i need to weld 4 pieces into a square, or could I use something like 12ga channel steel?
 
halifaxhops said:
Need a pic TY
Click to expand...

Right here Ray,

22563111314_572267382a_c.jpg
 
Morning Ex. The rail is basically u shaped with outward flanges on the top. I had a shop bend pieces with one flange in and one out. Welded them together to form the u shaped channel. They told me they couldn't do in one piece. Look up my thread Disturbed duster a few pics of what I did.
 
Ouch, I would look for a new piece, you have a lot to repair there around the spring mount. I dont know what is left untill you start cutting it out. There is a guy in the parts car section right now fully parting out a duster. Maybe he can cut out all you need? I am not a body guy any one else chime in?
 
GeorgeH said:
Morning Ex. The rail is basically u shaped with outward flanges on the top. I had a shop bend pieces with one flange in and one out. Welded them together to form the u shaped channel. They told me they couldn't do in one piece. Look up my thread Disturbed duster a few pics of what I did.
Click to expand...

Gonna check your thread now, but do you mean like this? Or do the flanges on top bend out over the sides?
46600D.jpg
 
Expire said:
Gonna check your thread now, but do you mean like this? Or do the flanges on top bend out over the sides?
46600D.jpg
Click to expand...

The top flanges bend outward and are flat, the floor lays down on top of it and is welded to the flanges. Pics are on the last page or 2.
 
You must log in or register to reply here.
-

Back
Top