City board meeting in an hour and not looking forward in it. 
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Walk in with a 2x4 and announce the meeting will come to order.City board meeting in an hour and not looking forward in it.
Good idea Ray I could do that.
abdywgn
dismantler
tap the outer holes for a 7/16 thread and use a 3/8-7/16 combo stud. on the original (Carter bp) holes, use a socket head cap screw (or is it called allen head cap screw?) and a reamer to drill down below the mounting surface. that way, the head will sit flush or below the upper carb mounting surface.
Hey thanks
I'll need to get a bench top drill press, but I've been meaning to for a while...
Wonder if that’s the same WCFB base that my poly intake has. If so, speedway motors has the correct adapter to go from that base to a 4150/4160 for less than 20 bucks
Progress.
Need to get this on next
This is bullshit. When did this happen? Someone was in the shop but can't imagine they had any need to open the door.
waiting to hear back from the landlord. grrrrrr
Need to get this on next
This is bullshit. When did this happen? Someone was in the shop but can't imagine they had any need to open the door.
waiting to hear back from the landlord. grrrrrr
pretty sure that’s the early base.
It's a 67 ....
Hurry up and wait
Yeah... I was denied an MRI... Doc told me if I was older, I could get one, but I was too young at the time.
Whole shebang finally let go... disceectomy and lamonectomy. World of difference... I'm glad it ruptured. Those SOBs would have kept torturing me with PT forever
(P.S. Yes, I am bitter)
Last edited:
Hey Fred... @Frodee what year is that person asking you to do a center console for?
I was just cruising... [this is.auto and I think your person had a 66???]
Anyhooo
[FOR SALE] - 65 Barracuda Shifter Console For Sale
I was just cruising... [this is.auto and I think your person had a 66???]
Anyhooo
[FOR SALE] - 65 Barracuda Shifter Console For Sale
But it’s set up for the early carters is my point
The Eddy 1403 and 1406 fit the stud pattern, but I want to use the Holley.
He has a 65 with a 4 speed and he's looking for 66 bucket seats so I can squeeze a center console in.
Fred, did you ever find out what city your daughter is in in Vietnam?
Took your advice Ray I walked in with a 2x4 and everyone else had a 4x4.
No I didn't Mitch still waiting for her to get back to me. Damn kids always tell me last.
- Joined
- Mar 17, 2018
- Messages
- 14,404
- Reaction score
- 33,310
I think you can buy an adaptor plate.
Been rooting around with no success.
Part of the problem is, as usual, I'm not sure of what exactly it is that I'm looking for .
Terminology kicks my ar%s
Eddys are built off Carter’s bases
You need a carter to holley bar plate adapter hang on
https://www.speedwaymotors.com/Search?query=Afb to Holley adapter
The question is, do you have the WCFB base or the AFB base, what were your measurements again?
That year should be AFB but I’m checking
-
