Search results for query: *

Have been chancing my tail on my 318 engine not running correctly. Had a well known Mopar engine rebuilder[Wayne Hyrowick] rebuild my engine ,Keith Black #167 pistons, .30 over , Hastings Piston rings, 30 over, Comp Cam 20-223-3 and matching springs, lifters, alum. intake, 4 barrel Holley carb...

Have a on going engine idling/ running problem, have a 69 Cuda 318 . auto , have a Holley carb on engine, I have about 200 miles on engine. thought had a carb problem. I have another post on here about that, from what I got out of the group on here, possible timing issue, so any way, I had some...

Have a 69 Barracuda, with a 318 , auto trans. back story , over the winter had a Battery Tender brand charger on the battery over the winter like a have in the past, [ battery cables where still hooked up ], come earlier this year appears that the Battery Tender over charged the battery and took...

have a fresh built 318 high dome pistons mild comp. cam, have just run the engine for maybe a total of 2 hours, have not driven car, how long would you wait till you would change the oil?

this is a fresh rebuilt 318, comp. cam, hi dome pistons,had a issue with a rebuilt holley 600 cfm duel pumper carb, which I had posted here, I think I have taken care of the carb problems , I think, does not leak fuel any more, set fuel float level, adjusted the air/fuel mixture screws, got...

Getting close to firing up my rebuilt 318, had front of car on jack stands, to fill cooling system to get the air to bleed out had a minor leak at the thermostsatic housing took off cleaned and used form a gasket, had car still front up in air on stands to put the header panel, bumper on car...

hi just got my 318 back from the shop with a total rebuild since I did not have the distributor the guy could not install it for me, so he did not install the drive gear, told me he has the #1 cylinder at top dead center for me (compression), told me to just have the rotor set at # 1 on the the...

Hi, getting ready to send off my 318 to machine shop to get started on a total rebuild performance upgrade can anyone tell me from this engine number what year it is? 0087303183,also started to remove parts from the engine took off the motor mount brackets bolted to the block it did not look...

hi someone near me has some new parts that he never used for la 360 engine,FOR SALE, mopar performance valve covers, thermostat housing chrome, aluminum high flow water pump and a set of brass freeze out plugs will this fit my early 70 318 engine ?? has some very good prices !!!ANY INFORMTION...

was looking thu the craigslist here pa. under the listing for reading posting # 3221084417, person has a number of cylinder heads for sale with a photo of all of the heads, i wanted to know some fair prices to offer on some of the heads, 1st is a pair of j-heads complete w/1.88 valves, 2nd is a...

i was on line today and a came across this web site,racingjunk.com, found a 68 340 engine for sale that list that all machine work is done with it being bored .060 over with x heads is that ok to be bored out that much?? and has anyone used this web site before? person is asking 800.00 for it...