Search results for query: *

I’m finishing up the restoration on my 69 340 4spd barracuda but am having some unexpected clearance issues with the steering linkage and starter. I replaced all the standard wear components (idler arm, Pittman arm, tie rod ends) (yes I know the pins are not in them yet, mostly). I am seeing...

I’m finishing up the restoration on my 69 340 4spd barracuda but am having some unexpected clearance issues with the steering linkage and starter. I replaced all the standard wear components (idler arm, Pittman arm, tie rod ends) (yes I know the pins are not in them yet, mostly). I am seeing...

Looking for a full set of 69 wheel opening moldings. Before buying reproduction, thought I’d see if anyone has a set in good driver condition Please PM Thanks Jay

I have a 69 barracuda that I’m finishing up the restoration on. I bought the car in pieces so I don’t have photos of how all the wiring was originally. I did buy a wiring diagram but it does not match exactly what I have in the car. Can anybody help me with identifying these connections. The...

I have a 69 barracuda that I’m finishing up the restoration on. I bought the car in pieces so I don’t have photos of how all the wiring was originally. I did buy a wiring diagram but it does not match exactly what I have in the car. Can anybody help me with identifying these connections. The...

Looking for a clean drivers signal lens Please PM me Thanks Jay

I have the larger middle brackets for both front and back but missing all 4 of the smaller corner brackets that attach to the fender and quarters. Please PM me Thanks Jay

My 69 barracuda is missing the drivers door seal, see photo Looking for one in good driver quality Please PM me Thanks Jay

Looking for a pair of clean back up lights. Need housing, lights and lens Please pm me with offering Thanks Jay

Prefer one of those color coded and laminated larger ones Pm with offering Thanks Jay

Wanting a clean barracuda hood release, looks like this please PM with offering Thanks Jay

Looking for a clean drivers side signal lens Pm me with offering Thanks Jay

Looking for a clean 69 barracuda, drivers side outer quarter window fuzzy. Please PM with offering Thanks Jay

Need everything from housing, light and lens. Looking for left and right sides. Prefer clean with minimal pitting if possible Please PM. With offering Thanks Jay

Working on a 69 barracuda, doing a restoration and just did a pirate jacks front disc conversion and changing the master cylinder. I can not seem to get the old push rod out of the old master cylinder. Kind of need it for the new master cylinder. Any suggestions? It rolls and spins like there...

Looking for a A body glove box button that mounts on the glove box door. Please PM with offering Thanks Jay

A few years ago I had my 340 rebuilt, I’m now finishing up restoration on the rest of the car and will be needing to prime the oil on the engine. Normally on a non mopar, I would pull the distributor and hook a drill to the oil pump shaft that connects to the distributor. I just realized that...

I am looking for a wiring harness use for the wiper motor, (from the firewall block to the wiper motor). Mine has been spliced and reworked to the point where I would not trust it not to burn the car down. Please pm me with offering or questions Thanks Jay

I am looking for a drivers side rear quarter window regulator and non A/C glass for a 69 Barracuda fastback. I am including a photo of what I need. Please pm me with what you have. Please figure shipping to Ft. Myers Fl. 33919 Thanks Jay

I am looking for a new set of factory seat covers (standard buckets and back seat in black) for my 69 barracuda. PUI has them but website says they are on 24 week wait list. Anyone have a set? Any suggestions on where else to check? I did not see them on ledgendarys website but will call...

Just hit a mile stone with my 69 Barracuda 340 4spd. After about 300 hours of metal work, Body work, block sanding and paint work. It’s finally got some color. T3, Honey Bronze metallic as it was originally, only this time it’s base/clear. I installed full quarters on both sides, drivers...

I have been spending the last year and most of my savings restoring my 69 340 4spd barracuda. I’m generally pretty capable with most areas in doing the work but there are some mopar specific things that I rely on the A Bodies crowd for. One such area was obtaining the correct 340 motor mounts...

Looking to buy for a 69 340, a right angle oil filter adapter Currently the exhaust down pipe is trying to occupy the same real estate as the filter. Please pm me, Jay

I bought a Disc brake conversion kit from pirate jacks, my 4.4 inch rims do not clear the calipers. I’m looking for two or possibly or all four, SBP 14 inch steel wheels with a 5.5 width to clear the calipers. Must be small bolt pattern. Please PM me with any offerings Thanks Jay

I purchased a disc brake kit from pirate jacks, therefore my 69 barracuda with small bolt pattern 14 inch wheels. Currently I have a set of 14 inch steel rims 4 1/2 inch. I’m getting a little Rub from the caliber. I did a little grinding on the caliper to see if that would correct the issue but...

I bought this 340 barracuda Completely disassembled. I am noticing upon assembling that the exhaust manifold dumps about an inch off the oil filter. I can’t even imagine how to bolt up the exhaust pipe or what kind of bend it will have to make for this to work. Is this normal? The drivers...

I am restoring a 69 Barracuda, I bought it with the engine and trans in pieces. I have now rebuilt the engine and the 4 sod trans, about to put the 2 together but need to know. Is there supposed to be a spacer plate between the engine and trans? I did not get one with the car but just seems as...

I am needing a good driver quality (little or no pitting) drivers side grill chrome trim. Please PM me Thanks Jay

I am restoring a 69 Barracuda, in the process of de-construction I managed to break about half the body bolts, fender bolts, the smaller header bolts, radiator bolts, and hood bolts. Does anyone offer a nut and bolt kit?

Looking for 2 14" Small bolt pattern stock steel wheels. I am not sure if they offered different size (offset) wheels, but I would be looking for wheels that could handle a disc brake conversion. Please PM me I am located in Ft. Myers Fl, 33919 Thanks Jay