Search results for query: *

I am looking for a RH(passengers) front frame rail to fit a 69 Barracuda. Upper control arm mount needs replacing. Please let me know if you can help. Thank you. Patrick

Hey guys, decided to replace the rear crossmember while doing the drivers rear spring support. The crossmember was rusted on the drivers side and bubbling through at the frame mount. Removed the crossmember and it appears that the frame rails are rusted between it and the end pieces. See pic...

Hi folks, hope you can help. Was planning on replacing the rear 10" drums on my 69 Barracuda. The local parts shop is suggesting Raybestos 2932R. I checked online with Rock Auto and there seams to be listings for both 2932 and 2932R. Is the "R" just a designation for rear? Are they the same...

Hey Folks, does anyone have a clean/straight 69 Barracuda drivers door they may be interested in parting with? Thanks for your help. Patrick

Hi Guys, looks like my old fuel tank pad can't be removed in one or even two pieces. What are you guys using or have used for this pad? Can't seam to find it at too many places and at $159 it's a bit pricey. ( http://www.jimsautoparts.com/fuelpart.htm) I see Dante's has a rubber one for...

Can anyone tell me if they have clear coated a carb before? Did it last? I just had my Carb rebuilt and it looks like new. Carb guy said I should clearcoat it with a hi-temp clear if I wanted it to stay new looking. Just not sure how it would stand up to any gas leaks. Thought I would...

Hi guys, I am thinking about getting rebuilt calipers from Rock Auto. Any difference between Centric and Raybestos rebuilt units? I see that only one side is available for the Raybestos currently. Thanks for your help. Patric

Hi Guys, just wanted to know your thoughts on switching to a HV oil pump in my 340. Original 41,000 miles. While replacing valve seals I discovered a blown head gasket. (Compressed air) While the heads were off I had them hot tanked along with the intake manifold. Cylinder walls look...

Hi Guys, I plan to replace my old fuel tank since it's leaking. (69 Barracuda) What's your advice on tanks? I see that Layson's has a (Ni-Tern LT35) gas tank available. Rock Auto seams to have the same part # CR11C. What's the good, bad and ugly with tanks? Thanks for your help. Patrick

Hi Guys, I was hoping someone could look in there spare parts boxes for a couple chrome Heater Control Knobs and also a dash cigarette lighter element. For my 69 Barracuda. Not sure if you have anything you would part with, but the help would be greatly appreciated. Thanks, I appreciate the...

Hi Guys, can anyone help me out with a decent driver quality bumper for a 67-69 Barracuda. Preferably with bumper guards? Ship to Washington State or Western Canada. Thanks for your help. Patrick

Hi Guys, a buddy has an extra rebuilt brake master from a 73-76 Dart w/front power discs. The old one in my 69 Cuda is leaking. (Frnt Discs also/Kelsey Hayes) Was thinking, are there any issues with just swapping out the two? Will the existing booster work? I see there is a size...

Hi Guys, I have read post after post regarding interior quality etc from the likes of Legendary, Year One, Dante's and PG. Seams like there is a vast disagreement even when it comes to the quality of Legendary. (Of course most of these are old posts.) Need your advice. I want to replace my...

Hi guys, does anyone have a spare B5 blue armrest pad they are willing to part with? It's for my 69 cuda. Thanks for your help. Patrick

Not mine but here is a 69 fastback on Seattle WA CL someone might be interested in. http://seattle.craigslist.org/see/cto/4413459218.html Cheers Pat

Hi guys/gals, hope you can offer some advice. I want to attend either the Mopar Nats or Carlisle this fall. Flying from Western Canada so can't do both. In your humble opinions which one is a better bang for the buck? (ie. more muscle vs classics and vendor/swap areas) Thanks for your...

Hey Guys, I am not sure if anyone else has seen this but it appears AMD has produced "correct" trunk extensions for the 67-69 Barracuda. Different part# at the least. https://www.autometaldirect.com/images/newparts/AMD_Barracuda_67-69_TrunkFlrExt_10-4-12.pdf Has anyone tried them yet? Will...

Hi Guys, does anyone know where I can get rear panels for the buckets seats in a 69 Barracuda? Preferably B5 Blue. Also, does anyone make re-pop kick panels in B5 blue? Or is there a paint alernative? Mine are pretty scratched up. Thanks for your help. Patrick

Hi Guys, getting ready to replace my drivers side rear quarter panel on my 69 Barracuda. I want to cut the panel an inch or two below the top crease just above the fuel cap. I see AMD makes a nice replacement panel but I don't need the whole panel. Both Goodmark and Sherman make replacements...

Hi Folks. Does anyone know if they make Re-pop bucket seat backs for 69 Barracuda's? I am looking for a couple of new ones or bare ones that I can recover. Specifically in B5 blue. I am actually not certain on what they look like or what they are made of. Cardboard, wood? Have seen some...

Hi Guys, could someone tell me where I could find front spring hangers for the rear springs with the bolts already attached, like OEM, for my 69 Barracuda? I have seen aftermarket ones without the bolts and offset examples with teh bolts but nothing standard. Thanks for your help. Patrick

Hi fella's, does anybody know if the following book from Year One is worth getting? Still trying to find out how many Non-Formula S 69 Barracuda fastback's, with 340's, were made? Part Number: GGB3 "Production Options Code Book" for 1969-1971 models...

Hi guys, I apologize in advance for the Newbie questions. Just trying to figure out the real "mopar" world. I am aware that the Barracuda was produced as the "Cuda" in 69 with the 340, 383 and 440, stripe package, blacked out grills and deck applique with a "Formula S" badge. Are these...

Hi folks, brand new to this site. I just picked up a solid and mostly complete project car. A low mileage (41K), numbers matching, all original 69 Barracuda at an estate auction. I am confused with the fender tag. The decoding sites don't seam to help me much as the top line is 3 sequences of...