Search results for query: *

What do I need to do to fix a small leak coming out of here? Is there an o-ring on this thing? Thanks!

Anyone have a pic of where/how they have their purge line connected to the 1920 carb? (from carb to canister) I'm confused about how and where to attach it to the carb. Previous owner had a clamp on the hose for attaching it to the carb, but I'm not sure where they were clamping it onto since...

Just curious if anyone rebuilds 1BBL carbs for people on the forum? Thanks, 2kids

Hi folks, Here’s the pattern on my 71 Dart….I think it’s a carb/choke issue? It’s variable, sometimes it will start on the first start of the day without even setting the choke, other times I have to actually pump the gas pedal while cranking it over in order to get it to start. Then, if...

what the heck tool/trick do I need to use to swap out the neutral safety switch on my 76 Duster ?? I ain't gumby dammit!

Just checked the oil dipstick on my /6 and it's reading WAY WAY too high. Check it while the engine was warm and running. Replaced the head gasket last summer - car runs fine. Now I'm questioning if my buddy added too much oil back when we did the head gasket or what? Suggestions...

Tried ordering a new transmission pan from the dealer using the parts numbers: 52118 779AB Parts guy says the pan number changed and he was not positive if the parts were the same ones I wanted, but they appeared to be - anyone else encountered the changed parts numbers? 5211877AB has...

Anyone have a picture of the gas tank ground wire location on a 71 Dart /6? Thanks!

Hi, I'm considering going with some external gauges for coolant temp, oil pressure and voltage and recommendations/tips or brands? 1971 Dart Swinger /225 Thanks! 2kids

Hey, Is there a good thread somewhere for slant 6 head gasket replacement instructions? I can see that it's probably not that hard to get to, just wondered if there were any tips/suggestions to make it easier for a newb such as myself. Thanks, 2kids

Hey, tough to know where to post this.... 71 dart swinger /225 I need the window washer plastic piece that that attaches to the firewall. It's a tri-prong piece of plastic that allows the washer fluid container to connect to the two window washer hoses, held in place by a Phillips screw...

So admittedly I'm a newb when it comes to mechanical stuff..... I spent a good amount of time reading (over and over) the HEI Electronic Ignition upgrade info on .org. I finally start to understand it and start getting ready to get the parts. Then I decide to go see what my current set up...

I'll try to cut to the chase. I have a slant 6 225 in my 71 Dart swinger - it was recently rebuilt, not by me or anyone I know. We had it running for the first time last week - ran okay after it had just had a cold and hot valve adjustment. Ran good enough to drive it around the block a...

Hey, I'm looking for basic instructions on lowering my steering wheel. I've read the threads where I need to do this in order to get my instrument cluster - but I'm not sure what all I need to loosen to lower it enough to get this job done. Guessing I'm just lowering it down and resting it on...

I need a new instrument regulator and am having a little trouble finding one for my 1971 dart swinger 225 slant 6. I found one at rockauto but it's listed for a 198 cu - not sure if this would be the same one that I need? Can anyone confirm and or let me know where to get the one I need. Seems...

Hey, I've got a single exhaust ready to install - even have the diagram of how to lay it out. I still can't see exactly what I'm suppose to attach the hangers to....can someone "dumb it down" for me. 1971 Dart Swinger 225 Thanks!

What do you guys think of this exhaust system - anyone ever purchased one of these? Looks like you can get it for like $280 on sale + shipping: http://www.accurateltd.com/63-74-A-Body-225-Slant6-Complete-Exhaust-System_p_193.html thanks!

I need a new one - suggestions for a manufacturer? 1971 dart swinger, drum, manual Thanks!

drain bolt on the oil pan seems to be leaking would a self tapping plug be a good option to try - any other suggestions? Thanks!

Is it okay to just run unleaded in these slants or am I suppose to be doing a fuel additive of some kind? Thanks! Darcy

How do you do an oil pressure test? Where do you attach the gauge? Thanks!

My car came with the valve cover off and no bolts to reattach it - anyone know offhand what size bolts I need to attach the valve cover? 1971 dodge dart swinger /6 225. Thanks!

I'm just at the beginning stage of exploring my low oil pressure problem in my 71 dart swinger 225 /6. I've gotten some good advice from you guys about checking to see if the rocker shaft is in properly before I do much else. In my dart manual is says to have the "flat" of the rocker shaft on...

My 71 dart swinger /6 did not come with an air cleaner. What are some good sources to get one? Chrome, painted, price, etc? new/used.... Here's a picture of my engine: http://www.forabodiesonly.com/mopar/attachment.php?attachmentid=131276&d=1267066551 thanks!

How is it that this engine compartment is so clean? The walls of the compartment look like it's never been driven. Can these compartment walls be totally re-done or something? Maybe a strange question, but it was one really obvious thing when I was looking at the car. Thanks, Darcy

What do you guys think. I'm considering buying this car. I am an admitted newb and will probably have to find someone to help me fix this engine no matter what. Here's what they say about it: "71 dart swinger 225 slant 6 cylinder that has been rebuilt but he cant get oil to the top end"...