Search results for query: *

Has anyone used a Lokar kickdown cable on a T/Q? Pics of the hookup method to the carb would be very helpful. Lokar's instructions are not much help. Thanks, Bob

This is a friends transmission that he bought for his 318 '75 Duster. I noticed this small black electrical plug and We're thinking this may be a lockup transmission. If so would it be ok to run it without the lockup hooked up? Could he wire in a toggle switch for the lockup and switch it on or...

A buddy ask me this question and I can't find the info he wants. He is swapping a 318 with a 904 into a 76 Duster that had a /6 and 904. Will the column linkage and drive shaft from the slant work with the 318- 904? The 7.25 is staying in the Duster for now. Thanks in advance, Bob

Would the pan from an A-500 work on a 904 transmission? I thought it might be a cheaper way to get a deeper pan. Bob

I need to find column shift linkage for my 74 duster. I swapped in a 360 & 727. Do the 904 and 727 share the same linkage? For kick down I have a Lokar cable. Thanks in advance, Bob

I'm putting a shift kit in my 727 and I have a problem. I can't find a socket for my in. lb. torque wrench that will fit the band adjusting bolt which has a square or rectangular head. What tool is used here and where can I find one? Thanks Bob

I'm needing the factory driveshaft length, center to center u joint, for a Duster with a 727 and 8 3/4 rear. I don't have my drive train installed yet, but have a chance to get a driveshaft if I can come up with the correct length. Bob

Anyone know off the top of their head, what size nuts hold the carrier to the housing on the 8 3.4 rearends? My housing is at a machine shop and I'm going shopping for parts in Nashville tomorrow. The shop opens late and I'm leaving early. Bob

I'am putting a 727 transmission in my Duster in place of the old 904. It has a mild 360(9 to 1 comp. magnum heads, 230 duration 470 lift cam, air gap intake and tti headers and 2.5 x-pipe exhaust) and 3.23 rear. I bought an 11" B&M Converter from my buddy and now he can't remember if it stalled...

My wife has a 65 Mustang she's wanting to sell. The parking pawl stopped working.It clickes when you put it in park and will roll when parked on a slope. What would be the fix and what would be a high estimate for a shop to repair? Other than this problem it works fine. Need to get rid of this...