Sorry to hear that
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
goldfish65
Well-Known Member
Very sorry to hear, condolences to your wife and your whole family.
Ben Drinkin
Hey bartender!
Ben Drivin is finally home.. with a frosty beverage...
goldfish65
Well-Known Member
Welcome back. As you can see the place went all to hell while you were gone!
Ddaddy
Just doing what I do
Glad you made it home safely and even better that you have a nice frosty beverage in hand!
Just stay away from the dog!
Glad you made it home safely and even better that you have a nice frosty beverage in hand!
Just stay away from the dog!
Ben Drinkin
Hey bartender!
Photo attempt
:confused::cool:
There will be more
Very sorry to hear that Mike. Condolences to you and the family.
Eddie came over today and we worked on his engine. We got the heads on, then the oil pump and windage tray. He had to go as it was getting late.
Next we need to get the oil pan on and then the lifters, rockers, and push rods. I just did some calculations and CAD layouts to try to estimate the push rod length to use the 273 rocker arms on a hydraulic cam and lifter set up vs the stock solid lifter set up....
The solid lifter is blue and the hydraulic lifter is purple. I compared the two lifters, then calculated the push rod length to keep the top of the push rod at the same height as the 273 rocker arms would be...
Next we need to get the oil pan on and then the lifters, rockers, and push rods. I just did some calculations and CAD layouts to try to estimate the push rod length to use the 273 rocker arms on a hydraulic cam and lifter set up vs the stock solid lifter set up....
The solid lifter is blue and the hydraulic lifter is purple. I compared the two lifters, then calculated the push rod length to keep the top of the push rod at the same height as the 273 rocker arms would be...
I'm so sorry to hear that, Mike.
ScampMike
Despicable Damn Yankee
aw man - M1 - sorry for your loss my friend and my sympathies to your family too
Morning, M3!
Dang, wide awake as Joey @ 4:30 am.
ScampMike
Despicable Damn Yankee
morning Anders
And morning M1. Again, I'm so sorry for your loss.
Thanks Anders and thanks to all for your kind words.
Alright! Finally managed to make my avatar small enough!
I wonder if it was the pixel size that was the problem. Going from 200x200 to 150x150 fixed it. The file size was already below 9 kB.
edit: It's a monster my daughter drew a few weeks back.
I wonder if it was the pixel size that was the problem. Going from 200x200 to 150x150 fixed it. The file size was already below 9 kB.
edit: It's a monster my daughter drew a few weeks back.
ScampMike
Despicable Damn Yankee
whoa - time fly's... gotta git - cyas later!
Mike sorry for your loss. Viewing tonight and funeral tomorrow for my brother in law. As soon as things get settled here at home I will make plans with hops to get the lift delivered.
As for the new format here well you can't please everyone .
I figured it would look like this. Don't like it so I won't be around much.
As for the new format here well you can't please everyone .
I figured it would look like this. Don't like it so I won't be around much.
Awwww Mike. I am sorry to hear that. My prayers for you and your family.
-
