Search results for query: *

stock 5.7 hemi with modman intake. Enderle bird catcher injector and a hughes aftermarket cam and lifters. running alcohol in my 3000lb 67 barracuda. ran 10.71

5000.00 20,000 ???

probably did minimal head work so they can upgrade down the road.

alot is a relative term.

Do they have a price breakdown? what would it cost to build similar motor with and without turbo

So Im doing a thing....

what article was that?

Ok guys I have said this before I will repeat proper flush and fill procedures. Don't use chemicals. find a good rad shop and they will do a reverse system power flush with compressed air and water. this goes thru your heater hose in reverse flow and flushes out your complete system. (your...

So for a buck or two per valve are the Hughes valves better? I have a Hughes Stroker kit and am very happy with it. I would think for an extra 24.00 I would go with Hughes

Cool What do you need to know about it? What headlights do you recommend for the upgrade

Can you make one for my 76 Dodge 1 ton dually?

too late to be a quadrophonic realistic stereo...

they are made in the USA, they will be around for a long time, 101 years and going strong, you dont need a reciept for warranty. Lifetime warranty only applies to hand tools. No one ever gave lifetime to air or power tools. Just letting you know...

the difference is between a car and a truck, the truck is 1" further out

also be careful where that flush goes to on the ground and into the water system.

unfortunately if you dont use compressed air and water in reverse flow you are not knocking all the buildup off and not the best way to do it. I used to own a Rad shop and that is the only way to do it properly. Remember to remove the top hose and take an old upper hose and cut it down to a 90...

one more thing to do once you get it all together. Go back to the radiatior shop and get them to do a reverse power flush on your car. Rad, heater, and engine. They use compressed air and water. Dont buy those plastic "tee's" they sell to put in your heater lines, doesnt work!

Ok Im lost here, are you doing a VW or a early 60s ragtop plymouth?

I am willing to bet the Kevin O'Leary's of the world don't have anything "Chinese" in their house unless it is from the Ming Dynasty!

The Chinese are more than capable of making great quality anything, but why would they make great quality unless you paid for it? Think about it, would you make something good quality if you were not paid for it and the competition got paid more for the same product? Just remember it is people...

I would take it but dont know how to get it home, any ideas

This my friends is the very first 833 to run 8's in a 68 426 Hemi cuda

pictures of the engine bay and trunk please

$200.00 ? whats wrong with that? decent looking for that price. But where is Zombieland?

Thanks Rusty, yes I have read that article that is what I got started on this road with. Seeing that it is an older article, and I have read since then there may be better pistons than the Vega I was just asking if anyone knew any thanks

I seen that and Charlie mentioned it too. From what I have read they are recommending put the 198 crank in with the 170 rods and pistons, then take your measurements. CC the combustion chamber. Then call a piston company and see what they have or recommend. Also check for clearance for the...