Search results for query: *

Has anyone tried Evapo Rust. It's a non harsh chemical rust remover, not a converter. It is non toxic safe on the hands biodegradable and can be safely dumped down a drain. I have not tried it on any of the surface flash I have in the trunk but I did drop a rusty pair of pliers in it. Much...

Here goes a paint question, and yes I have searched the forms but don't see anything that addresses this. Before some one ready this and assumes I am talking about painting the car in sections, I am only talking about doing this with the direct to metal epoxy primer from PPG or House of Kolor...

I know carbs are like a religion, but, I need some help. Lets start with as much as I know about the engine build. 360 LA, with hypereutectic pistons, Comp Cams Hi-Lift series 275HL hydraulic flat tappet cam. Edelbrock # 60779 Performer RPM heads, Elderbrock # 7176 Performer RPM intake. A727...

Is there a primer/sticky somewhere on pulley sizes and maybe conversation to serpentine belt's. My current configuration is; single belt driving water pump and alternator. I am getting ready to add rack and pinion power steering (Saginaw pump) and before the build is finished air conditioning. I...

I'm sure this is a novice questions but I'm asking it anyway. My Dart has Elderbrock performer aluminum heads. It currently has Hooker super comp 1 3/4 in headers. These headers have to go. I'm not sure what I'm going to do in the final product but in the short term I got a set of 360 high flow...

Anybody tried washing their gas to get the alcohol out of it. This is something I have been doing for a while on model aircraft engines.

I am looking for some experienced opinions here. I am close to prepping the body for paint so some solid advice will be greatly appreciated. First a little history, the car is a 67 Dart. The car has had at least one paint job and not a very good one, nothing peeling or lifting, just not well...

I was slumming around on American Muscle's web site and yes I know it's a Mustang site and no respectable MOPAr Gearhead would be caught dead there but I saw this and it looks interesting. I currently have Flowmaster 44's and don't care for the sound...

Help!!; I'm looking for something that I have no idea what it is called. The part is for a 67 Dart, it is the hanger on the Trunk lid hinge that the torque springs go through. I tried to do a search but little hangy things did not turn up anything. If anyone knows what they are called or...

Looking for left and right inner and outer wheel housings for 67-69 A body.

Show your wheels on a A body with Hemi Denny front end

Anyone running the American Eagle Alloys Series 111 or 211, looks like bullet's, American made and reasonably priced. http://www.aewheel.com/eagle_alloy_wheels.cfm?id=2362&cat=471

Anyone tried 255-60-15's on the rear. Not planning on moving springs but I do have to build tubs. I currently have 265-35-18's on the back just hate the lo-pro look of the tires.

Anyone use any of this. http://3mcollision.com/products/adhesives/adhesives-products/3m-panel-bonding-adhesive-38315.html

Hi all, working on my 67 Dart Retro-restro and am starting to look at the replacement of front and rear winshields. I am not going the traditional restroration route with new gaskets and clips and chrome trim. I want to go with a more modern aproach with the urathane seal strip and the black...

My car has a MSD ignition system and the previous owner removed the glove box and installed the electronics there. Is this done because of heat inside the engine compartment and is protecting it from the normal engine bay heat that important. I have been thinking about moving it to the fender...

I'm looking for the stock ride height of a 67 Dart. I would like to have a measurement from just behind the front wheels and just behind the rear wheels. I'm not setting ride height from these measurements, just want to compare the numbers to where my car currently sits. So if anyone has a 67-69...

As I plug slowly along on my 67 Dart, I was talking to a friend and he started suggesting that I change the complete rear suspension out for either Ladder Bars or 4 Link. I started looking on this site and either I am using the wrong search criteria or there is not a lot about changing the rear...

I have found a couple of repair manuals on CD/DVD on Amazon and Ebay anyone know what is the best one to get. Here is one of them. http://www.ebay.com/itm/DODGE-1967-Charger-Dart-Super-Bee-Shop-Manual-CD-67-/290463199332?pt=Motors_Manuals_Literature&vxp=mtr&hash=item43a0f4b064 .

Everyone, my 67 Dart has a 360 that is supposed to be north of 400 HP, with Edelbrock # 60779 Performer RPM heads, no Dyno data on it. It currently has Hooker 1 3/4" Super Comp series headers for SB Mopar into A-Body cars. I don’t like the way it fits, hangs down too low, rubs the steering...

I have done some searching and don't see a lot of post on Rear Disk Brakes. I saw these...

I'm sure I must be the only person on the form that doesn't know what a green rear wheel bearing is or how to tell if you do or don't have one. My rear end is a 8 3/4 with Dutchman axles. I am thinking about doing a rear disk swap and some kits say it must have green wheel bearings. Bobby

I have found a 67 Dart at a junk yard. I can go cut the rear wheel wells out to replace the ones in my Dart. My car had the trunk springs already out from the previous owner along with one of the spring bracket being removed on the passenger side, so I have no clue how to remove the...

I have a 360 LA in my 67 Dart with Headman super comps. I don't like the way they fit/hang down underneath. Been thinking about going to regular exhaust manifolds. The engine is north of 400 HP so it does need to be able to breathe. Does anyone know anything about these manifold numbers...

The Good!! The Bad!! And The Ugly!!!!! Or have you lost your mind, what the H#** were you thinking, at least that is what my wife thinks. Well I have officially taken the plunge into a “Muscle Car Build”. As a 20 year old I bought my first new car, a 1969 Dodge Dart Swinger 340 4 speed. It was...

Hi all, in late 1968 I bought a I bought a 69 Dart Swinger 340, here I am 45 years later looking for an A body car. I have a couple of project cars I'm looking at so I'm sure I'll be asking plenty of questions. I'm not so harded headed (wife might not agree) that I wont ask for help. Looking...