Recent content by 48plymouth

I to would like to see photos. Would like to have a 245 hemi 6! welcome aboard. Jim

Got mine from nostalgic air hope this helps

trans numbers should be on oil pan rail next to shifter. hope this helps

Sorry to hear this 73hcode.Did ask about the 340 he had.Did not want just a block.Never did post pictures of it or vin numbers!Maybe he never had the 340 just wanted some one to pay for one.

here is a picture on 67 dart

Have one on my 67 dart,installed behind bumper on bottom of radiator support.Will post picture if i find one.Help it run cooler to.

tti should have what you need.Just give them a call.

What all do you have with the block?Dont live to far from you. Thanks Jim

got mine from brewers he has new ones.hope this helps you out.

If you are running a flat head look up reds headers and speed equiment they have headers and intakes for them. hope this help JIM

I have a gasket for a 67 dart I got for my for my 67 dart that is in shop to be painted.After the glass man removed my windsheld I had the wrong one.Some one had switched it to the later gaskets and trim.If you need a gasket for a 67 I have one. jim

I dont bay from year one parts are made cheap and shipping is not.Jim

I installed one of these in my 360 worked great there are 2 wires on the dist.Red one is for 12 volt and + on coil black one goes to-on coil hope this helps. Jim

That is the mounts I used on my 67 dart. Was a /6 went to a 360 with 904 trans. Did not change crossmember bolted right in hope this helps.Jim

I think I saw some mopar engine mounts in speedway motors.(the ones that weld in) Jim