Search results for query: *

Greetings All! Been quite a while since I've posted but had a quick question for you. A month or so ago I believe I blew the head gasket out of the 360 in my truck. (smoke, coolant through exhaust). I was planning on pulling the engine out and going through it this winter but I don't have the...

Casting number is 4027596. Have had about $1100 worth of head work including oversizing for 2.02 valves and valve job done years ago. Have been sitting for a bit so could use a bath in the hot tank but should be great heads I would think. Asking $650 obo +shipping from Minnesota.

2 Edelbrock 1406 carburetors for sale. One (pictured) was on my truck and running good. The other i rebuild and swapped out and is currently running on my truck. Also have the the 1487 tuning kit. Opened but never used available for $30 for whoever buys one. Intakes are both in good usable...

I need brackets for A/C compressor. Must work with intake with thermostat housing in center. Thanks!

Hey guys. debating on a new carb. Here is the dyno sheet from my motor before i bought it as a long block. LA 360. Since, I have swapped the holley strip dominator with an Eddy performer intake. It has an Eddy 1406 on it now but i dont know if it's living up to its potential. Would it be wise...

I took the engine out of my duster and put it im my 84 ram. I swapped oil pans from center sump to rear sump. The engine has a windage tray. Will this cause a problem with the new pan? Also installed an oil dipstick (the engine didnt have one...plugged with sealant) but the oil doesnt even...

Started my 2000 YZF-R1 wednesday for the first time this year. Upon starting it, oil started pouring out of the oil filter. whole crankcase within about a minute. I changed the oil and put a new filter on and started it up again... same thing. Oil everywhere. Yesterday i brought home some cheap...

Wondering your guys' opinion on an oil leak i have. Oil is pooling onto the manifold. Part of the head is exposed (which i'm not a fan of) the oil is gone now but i imagine it ran back into that hole in the head. Is there a reason the intake manifold doesnt match up completely with the head? I...

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310609986042&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=111018652187&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en looks like jegs might have screwed up on pricing. i already...

Put a new engine in my truck ('84 ram) and now i'm down to tuning it. I can't seem to get a timing light to work on it. I tried 3 different timing lights but the flashes are very erratic on cyl 1. cyl 3 seems to be a little better (just tried for comparison) swapped cap, rotor and new plug wire...

Not really what I want to do, but in order to keep the factory air on my 84 ram 360, i might swap my holley dominator intake for an eddy performer. the cam has been custom ground 520 int .540 exh lift. dur @ .050 is 244 int 252 exh. I'll include a pic of the dyno. how is this swap going to...

Did a direct 5.9 to 5.9 engine swap in my 84 ram the other day and now when i try to put the a/c compressor back on, the compressor hits the waterneck. The intake is a holley dominator and it looks like the housing is off center more on the stock. Whats the easiest/best way to go about making...

I've got a set of 596 heads which have been oversized to 2.02/1.6 and ported. Just got them flow tested but the numbers seem low. Here are the numbers I E .100 60 52 .200 118 105 .300 164 140 .400 194 154 .500 193 159...

Hey guys, been a while since I've been on FABO. Thought I'd give an update. The duster is in the shop now, engine has been pulled and body is undergoing a rotisserie resto. Also bought a 300c 5.7 AWD. VERY clean car. Hopefully I'll be back on FABO more than I have been lately. Have I missed...

Where can i buy a rear window gasket for my 74 duster? i already ordered from AutoPartsWarehouse.com and they refunded me after they found they didnt have one in stock. then ordered from yearone and after 4 weeks of no word decided to call. they wont expect them in until the end of the year...

finally got insurance on the duster last month. storm came last night. found a tree on my truck and the duster.... anybody have a good roof for sale?

Looking to buy rims for my duster. The rear tires are 275/60R15. I am looking at U.S. Wheel 37-5812 or 37-5812P. Both are 15x8 but one is 4.75 backspacing and the other is 3.75 backspacing. Anyone have any input on which will fit better? New rear springs with 2 inch lift. No other rear...

hoping some of the bike gurus here can help. if kickstarting a cr500 isnt hard enough, my kickstarter likes to slip and i end up bruising the hell out of my shin. i plan on fixing this saturday. can anyone help me with a list of parts i'll need?

Anyone know which muffler i will need for a duster? flowmaster 40 series. i need to know if i need the center/side inlet and outlet or the side/side. thanks

Posting a picture of an aftermarket switch, dont know where its from or where to find a wiring diagram for it. If anyone could help me sort out what wires go where it would be appreciated.

anyone got one?

I had a custom converter made for me about 1.5 years ago and stuck it in when i did my motor swap. I heard they were supposed to act normal under regular conditions but mine seems to be slipping. anyone else have problems or is this normal? i have a video of it. the transmission was dumped of...

because it's MINE!!!! :love7: took it slowly down the road today. hot damn was i stoked, The converter seemed to slip a little more than i would like it to. http://www.youtube.com/watch?v=w2OyZzh_22o

wondering if there was a kit to rebuild a proportioning valve. my rear brakes would not get fluid. i cleaned out the valve really well and made sure the seal was on correctly and still nothing. finally got fluid when i removed the inner seal but i don't know how easily the rear brakes will lock...

Looking for throttle bracket and linkage. Car used to be /6. Now 360. Need something that will work. Thanks guys

looking for water pump pulley. around 2 7/8 to 3 inches deep. let me know what you have. thanks, Eric

Trying to hook up my water pump and alternator and ran into a few problems. The water pump pulley runs on the outer two grooves and the alternator runs on the inner grooves. Is there a water pump pulley with a larger offset that will work or am i forced to out spacers on the alternator to move...

well, tonight i think is the night, time to pour some gas down the carb and see if she'll start, then fuel lines and finish up the brakes and she'll hit the road! wish me luck! 8)

hi guys, looking for neutral safety switch pigtail for 727, having trouble finding one in good condition. thanks

http://mankato.craigslist.org/pts/1387907071.html I scrapped my running slant and got almost $60. looks like i got shorted about $1440...