Search results for query: *

I installed a new set of valve cover about 3 months ago with baffles just to find out that the roller rockers we hitting the baffles. After looking around I found a set that says : Mr. Gasket 9806 Valve Cover Mopar, Tall Does anyone know if this is the correct set to order, if not what are my...

I just picked up a set of NGK V-Power GR5 plugs, great deal ( Free ) and was wondering if they are good plugs and if they will work what with current MSD Box what should I set the cap at.... 360 Street Build.... Thanks

Yesterday after replacing New Valve Covers - New Gaskets one of the rear bolts only goes into the hole about 1/2 way to 3/4 of the way in before getting tight. I don't want to break it off inside so I have stopped trying to tighten down. I have 2 choices one is to go to the hardware get a...

I was wondering if this could be done or other ways of fixing an oil pan leak. I have a small leak coming from the front oil pan / timing chain cover seal. The leak is coming from the bottom of the seal, the part that sits on the pan side and not the side that fits the timing chain side. I was...

I am very close to installing a 360 Motor from a friend of mine that was removed from a B Body, the motor is very fresh. During the time I had it in the garage I have been cleaning and installing new parts. I replaced all the timing cover - water pump bolts with chrome ones, and also am going to...

I am installing a new 360 into my 1972 Duster this weekend , my question is do the bolts/nuts that mount to the 3 ears to the motor mater in the direction thet are installed. Meaning do the nuts go on the inside or the outside, I do know the the ears on the brackets go towards the inside but...

I was wondring what more needs to be removed besides mounts on motor, headers, and all elecrtical, Bell Housings, someone told me maybe the Z linkage needs to be removed for the 4 speed. I am ready to remove motor. I have a Haynes book and have read it but still unsure of what more needs to be...

I am replacing a deep oil pan that had a hv pump, i noticed that the back of the pan hitting the hv pump when trying to seat the pan, i was wondering if i should replace the hv pump with a standard pump or try and refit the pan.... like hammer out the side a bit..... Please help

I will be picking up a new 360 Flywheel this weekend, before I install new flywheel i would like to have new bolts for both the crank and clutch side. I need to kinda know what size should i be ordering. I would like to get a good set. Should i get ARP, or will normal ones work. Please let me...

I will be installing a ballanced flywheel between the crank and 4 speed clutch. I need to know what I should torque the bolts to on both ends. Thanks

I would like to know what you guys would do. I just picked up a rebuild 360 Motor this weekend, so here my question. The oil pan that was used will be way to low to the ground for me to use on my Duster. it a deep pan I havent yet taken the old pan off yet but would like to get ready to order...

Looking at a motor that says the following..... .484 lift / 230 duration @ .50 Lunati can 292 Advertised..... Need to have some specs on cam, it's in a 360 motor..... Will it idel good, what is normal RPM It is a 4 speed tansmission Thanks

I would like to know what type of problems i will have if replacing a 273 motor for a 5.9 360 motor. The person I am getting the motor from says it a complete motor. Will the motor mounts match up, with the headers mount up, with the bell housing match up. Or what else am i looking at to replace...

I am looking into a buying a Mopar 360 (71) with J heads ( Large Intake Ones ) New Mopar Purple Cam .450 Lift and new springs, i was wondering if $600.00 is asking to much for it. I need a motor and was wondering if this is a good price. What other question should I ask the motor guy about the...

ENGINE IS 1967 273 SUPER COMMANDO OUT OF A BARRACUDA WAS REBUILT W/ NO DOCUMENTATION BEFORE I PURCHASED USED..... This is how the paper work was stated when i got the car, so this is my problem, or question.... The car has been a great car except for a problem that has been driving me nuts...