Search results for query: *

Hey guys how are you making the car level before drilling to bolt in the frame connectors, where are you placing the jackstand, incase of working on the ground ( I dont have a lift) thank you George

Im with Mopardude, use Moog products, especially for the lower control arm bushings

Hey Thank you very much regards George

I want to make sure my car is level before I drill to bolt in the connectors. I was wondering a good place to place my level I was looking at Mancini racing and the have the subframe connectors 108 inches and 111 I did not know what size my car was, but now I know. thank you on that

yes I want to buy subframe connectors. Could you tell me good places to check for level on both axes?

Thank you By the way, where do you measure that?

Hello I have a 73 Dart Swinger is the wheel base 108 or 111 inches? thank you George

There is a tool it is very inexpensive that expands inside the bushing, then the other end of the tool press against the control arm and pushes the bushing out. I bought it and once the control arms were out it took minutes to get both bushings and the shell out...

Has anyone had any experience with this companies product? http://cgi.ebay.com/ebaymotors/XV-Mopar-Tilt-Steering-Column-A-Body-w-o-Key-_W0QQcmdZViewItemQQhashZitem4cebf71880QQitemZ330376353920QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_1389wt_941

Good Morning Someone is trying to sell me a brand new flaming river column. He says its for a Mopar and its 41 inches long. Could someone tell me the correct length of the steering column for a 73 Dart Many thanks George

thanks Preston

Hello All I replaced my strut rod bushings, but did not tighten them. I was going to work on the car this weekend, and lost the instruction paper that came with the bushings. My question is how tight do I make them, and do I tighten them while the car is still ob jack stands, or when the car...

thank you

Hello all when I removed the control arms, this is how the cam bolts were installed, I am curious if they are in correct, or does the adjustment end go on the outside, and is the lobe supposed to face up or down thank you George Gerhard

thank you. Perhaps I will wait until I complete the assembly, as I installed all new bushings

Hello my 73 Dart has a 400 with automatic trans. I am in the process of rebuilding the front end. Before I took everything apart I noticed that if I pushed down on the fender, the suspension did not lift the fender back up, I had to lift it up. The torsion bars measure .890" What diameter...

thank you

they are solid orange, and yes I have calipers thank you

Hello currently the front end of my 440 Dart is all apart, I am replacing all the bushings, upper all lower ball joints, I had the steering box rebuilt by firm feel. I noticed before I started this job that the front end was very stiff. If I pushed down on the fender, there was no spring, I...

Clhyer that seems to make sense as I tightened the nut the cstle nut seemed to be far from the cotter pin thank you George

Thank you Snake

Hello All on the lower balljoint it slips through the control arm there is a nut and cotter pin, no washer Is there supposed to be a washer between the spindle and the upper balljoint nut? Before I took the front end apart there were washers under the nuts of the upper balljoints thank you...

Hello all I have enclosed some pics. In order to remove the steering column do I remove the 2 bolts on the smaller flange, or the three on the larger flange? Also this car was automatic on the column at one time in its life. Now I will have a real problem removing the steering column as the...

I took apart my front end today to replace the upper and lower control arm bushings. I purchased from Summit the energy suspension bushings. The uppers came with shells, but the lowers are just the bushing. They provided a lube to be used. I have read on this forum people complaining of...

Hi George I believe if the car was equipped with disc brakes then the larger ball joint was used. Also I live real close to you, off of Mohegan road, would love to see your car some day

thank you

Good Day all On my 73 Dart, I noticed that the idler arm fits loose into the k member. Are there shim or spacers that perhaps someone forgot to install? Should this be a snug fit as you put the idler arm into the k member? Many thanks George [email protected]

Hello My manual steering box in my 73 Dart has a lot of play today I dropped the center link and when I grab the pitman arm I can feel a got amount of left/right play. I tried to adjust the box, but no matter how much I turn the adjusting screw I cannot detect an improvement. If I want to...