Search results for query: *

Hey guys. I’m not the kind too put this stuff out into the public, but we (family) are out of our league with this situation. Hence my reason for turning to the A Body community for wisdom and assistance. My 5 year old niece is in the hospital battling Acute Lymphoblastic Leukemia. She...

Local pick up only, I will not ship. Located in Silver Lake, Mn. Came out of a 70 Dart Swinger. The seat belts DO NOT come with it. $30

Local pickup only I will not ship them. Located in Silver Lake, Mn. Radiator is out of a 70 Dart. Pulled and replaced with aluminum. It worked fine. $20 Exhaust is off a 70 Dart. It had a nice sound flowmaster type sound if memory serves me correctly. It was bolted up to Hooker long...

I ordered another set of relocation boxes thinking that I was going to cut my current ones out and install these so that I could fit the Helwig swaybar I have. Decided to go a different direction. Up for grabs is a brand new set of relocation boxes in the unopened original box that RMS sent...

Trying to find out what the stock cam specs are for a engine I picked up a few years ago. Its casting says its a 1989 360. The previous owner said it came out of a 90 Ramcharger. The reason I ask is because I brought the 308 heads to the local machinist. Mentioned to him I was looking at...

Trying to find someone that will do some custom vinyl work. I've got some ideas for lettering and/or stripes. Any recommendations on a reputable shop, if so can you post pictures of the work? Thanks guys.

Anyone going besides me? http://www.brainerdraceway.com/drag-racing/nationals-overview.html I have passes for tomorrow and Sunday. Suppose to be a gorgeous weekend in the 70's. Bring on the ZOO!!! Here is the general gist of the Zoo. Welcome to the Zoo Brainerd Minnesota 2008 - YouTube

Alright guys and gals. I no long have a need for this stuff because I'll go the procharger route next time I get crazy. Here is your chance to pic up the hot side for a turbo setup. T4 flange for the turbo mount. 2 1/2 inch cross over pipe and merge pipe. 3" down pipe Dakota shorty headers...

Carb hat is for a 4150 series carb. Extreme Velocity O ringed carb hat with splitter. The Race Parts Solutions 3.5"-3" reducer and clamps will go with it. $215 + shipping

No longer need these parts. 50mm X02 Racing Blow off valve with 3" cold pipe. $100 + Shipping 60MM X02 Racing wastegate with 2 more springs. $100 + Shipping

Was in working order when I removed it to put in a custom dash. No pins are broke on the electrical plugs. Common issue when removing the cluster. Cluster- $40 + shipping AC panel $25 + shipping

Holley 4777 carb ( 650cfm double pump) setup for blow through. Was used on my 318 with ~7lbs of boost. I ran it with the 650 main body and then moved up to the 750 HP holey main body instead of cutting the choke horn off to fit the carb hat i had. It ran good, didn't have any problems with...

Post what you have. I will post more as I get through and process them. Kid was drawing the car for its owner. Think he said he charged $30. He goes around to car shows and draws cars to get money to restore an older BMW he has. This one is a work in progress.

Does anyone have a skin they want to part with? Or do you have a clean driver quarter that you would cut off and ship? It's needed for a 1970 dart swinger. I need from the door back to the fuel hole. I'm trying to replace this mess.

http://autos.yahoo.com/blogs/motoram...220845658.html Neat story, figured I'd share.

I upgraded to a coil over setup and no longer have need for this stuff. This is a complete, bolt it in and go K member setup for anyone looking to upgrade from their slant 6 or to disc brakes. This setup already has the large upper ball joints, disc brakes, sway bar and spool type motor mounts...

Where can I find this piece for the passenger side? Or didn't they make one because it was always integrated into the heater/AC box?

I'm changing to a coil over setup. What is this worth as a complete package minus the wheels? Its pretty much a complete swap for someone. V8 K member with power steering sector. Big ball joint upper A arms. Disc brakes. new tie rod ends new bushings in the upper A arms. I was...

Bought this stuff from VS Racing a couple years ago for my Dart build. Selling my it to fund the restoration of another Dart. Less then 100 miles on these parts. Was still in the tuning phase when winter hit, then I sold the car. MasterPower T70 .68ar T4 flange comes with the oil feed -4AN...

Is there a short and long snout water pump for small blocks Mopars? I'm trying to gain more water pump to radiator clearance, any ideas?

Had it on my Dart for 4 months then i removed all the turbo and fuel system parts and sold the car. Worked perfectly when I pulled it. Comes with 10AN fittings and the rubberized mounts. Fuel pump new is $333 Pump mount is $27 AN fittings are $28 Total cost new is $388 before tax and shipping...

Used for 4 months and then was removed with the turbo parts and rest of the fuel system before the car was sold. A2000 new is $174 2 - Aeromotive 10AN fittings are $28 8AN plugs - $15 8AN fitting - $14 Total New is $231 I will sell it all for $180 + shipping. Also selling an A1000 fuel...

Here is a side by side visual for anyone looking to do an over drive swap. Deeper pan as you can see. Different size output shaft. Hope this helps a few of you. Here is the 46RH (a518). Took a picture of it on the pallet at the bone yard. Its only a half inch longer then...

Let me know what you have. Need it for a 1991 360.

Any reason not to go with a 46RH? I have a line on a 1990 46RH out of a Ram Van with the converter that I'm going to look at tomorrow to make sure its the lock up version. Besides having to butcher the tunnel, cut the drive shaft and make a trans mount, is there anything I need to be aware of...

The motor ran fine and was pulled 2/5/2012 from a 70 Dodge Dart. Going a different route and don't have use for this one now. Its a LA motor with a casting date of 1978.. I put the following parts in it last spring. New Lunati Cam and lifters. Specs here ->...

My wife and I have been going around and around on names for our son thats due in March. No names have been set in concrete yet and I'm getting tired of going through baby name web sites and books. Got any good manly names? The one we both kind of agree on so far is Liam or Leum. Don't...

Where can I find replacement hardware for the front and back side windows on a 1970 2 door Dart? I just pulled the windows last night and I have a bunch of rollers that are completely shot. Looks like Dante's has some rollers, but they look to be only for the front doors. Any help would be...

Working on my build plan and could use some input. I'm going to be mini tubbing the dart and while i'm at it was looking at redoing the suspension in the rear. Ballpark numbers. Triangulate 4 link and coil overs for ~ $1000 Leaf relocation parts, new springs, sway bar for ~ $850 Waiting to...

Here are pics from my latest travels into mother nature. I really need to get to work on my Dart now... If your interested I will be adding more here. http://www.wolflakephotography.com/Portfolio/Backwoods