Search results for query: *

i have my 75 scamp that im working on and am thinking i wanna move to something else. i found a 69 dodge d100 that i really want and have always had a soft spot for. so my car... 1975 plymouth scamp 2 door originaly 318/904 car now it wont have a motor or trans but i converted it to 4 speed...

on hamb is there a members projects section? im looking for ideas and stuff and its hard looking thru each thread that might have something and just be talking

so i have been kicking around the idea of turboing my 360. it was just built so im not sure but want more info to influence my decision and figure you all might to so what all do you need to do to your lets say stock spec motor to turbo it? or is it better to break stuff and eventualy have all...

i really need some bbp 8 3/4 axels stock a body length. i will measure my housing to be sure its the correct length. i was hopein to find original equiptment ones not like moser or anything but they are few and far between at reasonable prices lol. so i found these on summit...

anyone ever use them? i am working on placing a pretty big order and they have almost everything i need except soft pads for wet sanding. so anyone get stuff shiped from them they seem pretty stand up guys and decent prices. i have always said with auto body the tools dont make the technician...

ya you read it right lol. on my 75 scamp the passenger side camber is erratic. when i bought it i didnt notice the tire leaning way in probably cuz it was fine at that time. after i drove it home(drove fine a little loose but straight) and around the shop a little a buddy said hey your tire is...

i am looking at a 96 dakota 2wd 5 speed but its got the 4 banger. how under powered is it? i know i wont like it for long so i will look into puttin a v8 in it. i have my 75 360 la motor thats built but will i need magnum heads to put a fulie intake on it for the wiring? i was gonna find a stock...

i have put this on here before but here goes again. my 75 scamp project i gotta sell. i really need money and a truck. the body is pretty straight. it was a grandmas so some dents and one in each front fender then one quarter is a little wavy. but almost no rust just one on each rocker smaller...

i havent been on here for awhile. i been busy with school and my other projects lol. i got two subarus and have been getting into rally and rally cross. well i am gonna sell my subie but still wanna race on something other then the strip. so i was wondering if anyone has rallyed a bodies? or...

so i am trying to make a redline guage pod for my scamp in autocad. they will be made outta abs plastic and i am going to make a few of them. should i put holes for guages in now or if i sell them just let you cut them out? and if so what size of guages and how many and where? i was thinkin a...

so i am really thinking about selling my scamp. i need a diesel and found a 68 dart lol. so what would you all think its worth? body is pretty straight with a little rocker rust clean other then that. the 360 was just rebuilt and bored 30 over ported and polished heads with i think 10.5 to 1...

i am workin on rebuildin my hurst shifter. got it torn apart and blasted now ready for paint and reassemble. i think i have it documented pretty good to get it back together but is there anything like a diagram or picture to help get it goin again? and the trans is currently stuck in 3rd...

i am rebuilding a steering column. its floor shift and shoule be for my 75 scamp. i bought it on here but it looks different then my 75 column shift. i will try to put a pic on here. my question is is this the right column and how do i get the middle shaft out and what should i look up to get...

i am looking for a driving school. something high performance and fun lol. but it needs to be more a school then an adult amusement park lol. if i can find the right one my schlorship will cover it!! i would like to be a professional driver (on closed course) and drive for comercials and such...

i have always thought it would be sweet to turbo my bike its an 81 suziki gs450txz what size of turbo would i want? it redlines at 9 to 10 grand but dont really like taking it that high lol kinda scary. i was kinda thinking something from a 4 banger at the junk yard? or my buddy has a 1st talon...

i know its not a mopar but its what god gave me so i am workin with it lol. i wrecked a 93 impreza a few months ago i have since got that car and bought anothr one to make one good car. the wrecked one is manual with a good motor tranny diff everything but frame and body. the other one is...

so one of my friends wants his chebby to go faster. he said his tranny was chewing up power. so he thought of a shift kit. what do they do? i suggested a high stall torque convertor. what are the pros and cons to them? and if he wants it more for the strip i suggested a manual valve body. i am a...

so i got these slicks in from a fellow member. they are 27.5x12x15. i know its close but i am planning on mounting them on 15x7 cop car wheels. would that be unsafe? and will they even fit under my car lol? it is stock suspension locations for now. i am planning on a mini tub and relocate the...

i need some 8 3/4 axels. there are some mosers on epay that are at 91 and they end in 30 min lol. anyone have a better deal? they need to be a body length. these need bearings so i will probably go green lol

will an 8 3/4 outta e body (cuda challenger) fit under my scamp? i guess they would be wider but how much? lol they are a lot cheaper the a or b body rears lol

i am in need of either an 8 3/4 housing and axels either b or a body and bbp or stuff to make my 8 1/4 sure grip with somewhere around 3.23 gears. also i want to rebuild or get a stage 2 power steering box or a manual steering box and i need to rebuild my 833 tranny or possibly get an od 833 in...

idk if this is the right place or not but here goes. move if it needs to be lol:) i am swaping my 75 scamp from power steering to manual. i already went to4 speed from auto so i wanna get rid of the extra shifter lol. so i need a column for manual steering floor shift and a manual steering...

i was gonna order some headers for my scamp. i looked on summit and there are summit ones for like 100 bucks and hedmans and hookers for like 150. i was gonna go hedman cuz they supposedly dont hang as low but would summit be ok...

so today me and my roomate went and got my scamp and brought it to my house. it was sitting at a shop in denver. i will be working more on it now so figured i would put it all together. the transmission is stuck in 3rd??? i am thinking maby rebuild the tranny and readjust the shifter. that...

idk where this should go so move it if you need to lol. i am driving my power wagon now. its a 75 with the 360 auto auto locking hubs so i could be full time 4x4. its a short bed with no lift (yet) lol. i need to do some towing and wonderin how this truck will do? i gotta put the wiring in...

will this work in my scamp? its not mini tubed or springs relocated yet but i plan on doing it someday lol http://denver.craigslist.org/pts/1457788396.html

hi all i just sold my blazer so im almost all mopar finaly lol. i will be driving my 75 power wagon now and is needs some stuff. i need beltline moldings, door weather strip, carpet, and heater control cables. where would be a good place to find that? or dose anyone have any they would sell...

its not an abody but i trust you all will be able to help out. my 99 s10 blazer front end has gave me fits. the first one went out trying to get outta sand. so i put in a used one. it has went out just driving around lol not even in 4x4. so i want to go to something better and maby cheaper. i...

i have always wanted a sugar glider. i am thinking about getting two and after a while breeding them. i was wondering if anyone had them? and what can you tell me positive or negitive about them? i would hate to get two and all the stuff then realize they arent for me lol. any other strange pets...

i didnt know exactly where this should go so move it if you need to lol. but i was in a wreck today in my girlfriends subaru. it was icey and i hit the right rear quarter panel on a 03 gmc duramax lol bent a bunch of stuff. this subie is tough. well i think mine gonna be totaled. i cant hear tho...