Search results for query: *

Hey everyone.. I joined the ranks of the unemployed in August.. That sucked.. However I have taken a job in Wauconda Il.. If there is anyone on here who knows of a reasonable apt/loft/room available around the area I'd sure appreciate any direction or help.. 19..

I have a grill that desperately needs repainting. I'm thinking of painting the same color of my rims. Which currently is "graphite" made by Dupli-Color. The color looks (I think at least) awesome on my rims. And it would tie the front and sides together in looks.. I know this isn't for some of...

Hey Everyone.. I got my "Plymouth Rapid Transit" stickers from evil 340. Just as he promised they are much better looking than the old ones. I asked him if he could have one made 12" round. I have an old shop clock in my garage and I wanted to put it on the face. Seeing how I can only find...

Well I've been on this forum for about 2 years. Met members at different events, spoke to a few over the telephone, and met a couple of the members off the interstate to buy parts.. When I first found this forum I had been searching the net for a good one that had some decent people without...

Knew that would get your attention.... LOL!! Actually I have a question. I have these 2 "F" body mirrors and I'm going to use them, however both were remote and I'm not going to put them back as remote, manual only. But my question is; does anyone have any pictures, illustrations of the...

I need to get one of these, I'm not sure if it's called either a "Heater Valve" or a "Heater Bypass Valve". My bad I should know... However It's starting to drip a little, seep, and hiss at the arm. So can anyone tell me who sells them or where to get one, that won't leak if its an NOS old...

Okay... I'm posting this here in this thread because its for looks, not performance as it probably would have gone into exhaust. But Mods... if it needs to be moved please do so.. When I was at the mopar nats this year I picked up a set of exhaust tips that are stainless steel. The kick is they...

Well in another thread I posted in about 318 Emblems, everyone (73Abodee) was intrigued with the chrome (looking) Bezels on my dual snorkel scoop. I finally broke down and told them it was 1/8" plastic stick on chrome looking trim. Something you can pick up at any local auto store. I also...

I wanted to get some kind of emblem for the Duster that had 318 Four Barrel on it, I was even going to to try to modify a 383 Four Barrel emblem.. However I did manage to get a hold of MOtorPARts here on FABO. Discussed with him what I wanted so he made a set for me. I'll show you the...

I have a question. I'm one that I like to make what I have reflect what it truly is. Let me explain, my car is a 318, Gold Duster. When I bought the car the person who had it put a 340 decal on the rear quarter, and I might add they both were backwards because they were on the wrong sides. I...

I replaced the gas tank, steel fuel line, sending unit and bent a line from the filter to the carb. All together and assembled.. Now the simple question... I'm trying to put my filler neck back in the tank.. (I have a folddown seat and pass thru--"space maker, Duster") Here's the ridiculous...

Is there a specific size of line common to Dusters from the tank to the pump. What I mean is 5/16" or 3/8"? Like did 5/16" come with slant 6 and 318's, and 340's have 3/8"? I really hate to ask a simple question like this, but I'm getting ready to change out the tank with all new parts and I...

If everything goes right I'll be at Chrylser Carlisle on Saturday!!! DUDES I'm excited! I'll be wearing my FABO T-shirt. Is anyone else gonna be there?? Will there be a tent or a gathering place?? I always go to Pittsburg over the fourth and never have the chance to go because it usually...

Well I got the Duster out and decided to take it for a shake down.. I wound up pushing it home the last 100 yards.. Boy was I PO'd.. Here's what happened.. Ran great, got up to temp no stutter, hesitation, everything was good. Cruised around for about 4 miles (in town). On my way home I sorta...

Alrighty, another one of these quetions that I'll get an answer both ways.. I bought and used the nylon 1" spacers that go under the front seat and space the seat 1" from the floor of my Duster. Heres the question do ya really need them? My seat seems/appears to sit higher, and add the fact I...

Can someone tell me if there is a screw in the bottom corner closest to the door. My old panels only had one on one panel. I was wondering if some one just stuck it in there to hold the panel in place or if indeed it needs to be there? Any info be much appreciated. 19.....

Well this is probably a dumb question however. As we all know it's a whole lot easier to tear some thing out then put it back. Well I took my dash all apart and now put it back. All I have to do is finish the steering column (lifting it back in place, it was down). As I started bolting it all...

Does anyone have the hood insulation pre-molded to fit a Duster? I just can't see paying $125.00 and up for a piece that shouldn't cost more than $30 to $60.00. Clips are not a big deal they are easily found and available.. PM me if you have anything.. Thanks 19 Again..

I'm looking for one more of these. (see picture) not the sleeve, but the piece that fits over the end of the sleeve under the seat (the one with the arrows pointing to it). Color is not an issue. These things are hard to find. If you have one you would like to sell, P.M. me with your details...

Okay I've looked for quite a while for a pair of Seat Latch Knobs. The quality is usually poor to bad. I refuse to spend the $50.00 + most want to sell them at. So I thought I would look at other makes like Chebby, Ferd, Keeahh, Punchiak, Honder, and any others you can think of.. So after...

I have somewhat of a dilema about my Ralley Rims. I bought the car a little over a year and a half ago. Steadily I've been working on it. The problem I have with the rims is, the guy I bought it from had all 4 powder coated. Don't get me wrong all 4 looked great! However in the process of doing...

I have a 73 Duster with the infamous Plastic Sail Panels. Since no one repops them, it sounds like all of us have the same issues. Cracked, in pieces, broken tabs, elongated holes, warped, plastic welded all over, and the list goes on.. I re-painted a pair that I bought last year and had to weld...

Hey everyone.. Off on my annual Christmas trek to relatives in PA. I'll be there most of the week. Anyone know of any good ole Mopar/A-body junkyards in the Butler/Pittsburgh areas? Thought it would give me some time away from all the mayhem of the holidays/relatives. Noth'in better than going...

I have a question. I have a 73 Duster with a 7-1/4 in it currently, and I have an 8-3/4 I'm going to put in it over the winter. The bolt pattern for the 7-1/4 is 5 x 4.5 (LBP) and the brakes are 10 x 2.5 too. Can I change out the current brakes & hardware to the new rearend using the same...

I'm getting ready to cut out the old floor pan (left side front and back 1 pc). I have the new one for replacement, which brings me to my question. I've read here, been told by others, and basically just wanting to know. Whats the right way to weld these in. I've been told to drop the new one in...

I'm getting ready to put in a new drivers side floor pan and I have the connections for the front and rear seat belts and sensor in the front seat laying loose. My question is simple, do I have to hook everything back up? Or can I leave them undone and not worry about the anoying buzzer? We've...

I bought a bumper jack for my 73 Duster. The jack is in great shape..however, the lift part is grey and the base is bright blue. So I thought I would ask which color should it be.. I'm not trying to build a show car, just don't want to have a two tone jack when I open the trunk.. Anyone have any...

Does anyone know if you use the off-set shackles on the ends of the springs, do you have to use the spring relocation kit for the fronts of them? In my opinion if you use just the shackles wouldn't it put the springs in a skew on the spring perches?? Or is just a way to gain a few fractions of...

Need all 4 pieces, I don't mind if they are a little "twisted, or dinged", I can do the body work to straighten them out. I just don't want any that are pitted so bad they are beyond fixing... PM me.........

Hey everyone, I was wondering if anyone would be interested in these parts. I had to junk a front bench seat from my Duster and pulled these out. First is the tracks with all the springs, eyehook,screws to mount to bottom of seat, and connecting wire. Second is the latches the pushbutton, cable...